Single Slide Vertical Injection Moulding Machine Manufacturer,Supplier,Exporter

Product Description

Single Slide Table Machine :

Vertical four column robust clamping and vertical screw type injection.
Dual injection hydraulic cylinder for smooth and balanced injection.
Large L/D ratio for homogenous optimum melt for all type of engineering plastics.
Programmable single sliding for suitable insert moulding process.
Hydraulic ejector after sliding table out position.
High end PLC & HMI for controlling and programming function.
Hand protection safety features.
Power saving high tech hydraulic circuit.

Technical specification

Machine Type	Unit	ABS VV 25-1S		ABS VV 40-1S		ABS VV 55-1S
Screw Diameter	mm	25	30	30	35	35	40
Injection Pressure	kg/cm2	1678	1166	1784	1311	1858	1423
Theoretical Shot Volume	cm3	44	71	71	110	110	166
Max.Shot Weight(PS)	g	40	60	60	100	100	150
Injection Rate	cm3/sec	35	50	52	71	69	90
Screw Speed Max.	rpm	0-250		0-250		0-250
Nozzle Reaction Stroke	mm	150		150		215
Number of Temperature Control	-0	3		4		4
Material Hopper Capacity	l	8		10		10
Clamping Force	tons	25		40		55
Opening Force	tons	7.5		8.3		10
Mould Dimensions (L x W)	mm	350 x 230		390 x 240		460 x 310
Min.Mold Height	mm	100/150		150/200		150/200
Opening Stroke	mm	200		200		200
Max.Open Daylight	mm	300/350		350/400		350/400
Ejector Force	tons	1.3		1.3		1.3
Ejector Stroke	mm	50		50		50
Slide Stroke	mm	350		400		500
Max.Hydraulic Pressure	kg/cm2	140		140		140
Oil Reservoir Capacity	liters	140		180		180
Pump Motor	kW	3.7		5.5		5.5
Barrel Heating Power	kW	2.7		4.7		5
Total Wattage	kW	6.4		10.2		10.5
Machine Weight	tons	1.25		1.9		2.3
Machine Dimensions (L x W x H)	m	1.6 x 0.9 x 2.6		2 x 1.1 x 3.1		2.6 x 1.2 x 3.3